The Ledlenser MT6 has a maximum output of 600 lumens from a single Xtreme white LED.
Powered by three AA alkaline or NiMH rechargeable batteries the MT6 offers three brightness settings and strobe, which are available in three pre-set selectable modes.
The torch comes preset in mode 1, which cycles through in the order of high, mid, low and off with each press. Mode 2 cycles through the settings in the opposite direction of low, mid, high and off. Finally mode 3 cycles through the brightness settings the same as mode 1, except when the torch is on in any mode, you can press and hold the button to activate the strobe setting.
Switching between modes is simple and is done by holding down the button while the torch is off. While holding the button the light will blink once to indicate mode 1 after 10 seconds, blink twice to indicate mode 2 after 13 seconds and blink three times to indicate mode 3 after 16 seconds. Once you have reached the setting you desire, release the button and the light will stay in this mode until you change it again.
The MT6 also features a lock out mode to prevent accidental activation when not in use and can be activated the same way as changing modes, except you hold the button for 19 seconds until the light blinks four times. To come out of lock out mode, hold the button for 5 seconds until the light blinks once.
An integrated power indicator in the switch of the torch indicates remaining battery power by displaying a green, yellow or red light. This will automatically happen when you insert the batteries or you can access it any time by holding the button for two seconds while the torch is off.
The advanced focus system allows you to focus the light from spot to flood by sliding the head of the torch forwards and backwards. On the highest setting when focused into a spot, with a fresh set of batteries, the MT6 can throw the beam up to 260 metres range.
Perfect for activities such as camping or fishing and comes with a handy lanyard as well as a nylon pouch for easy carrying.
Product Information
Three brightness settings and strobe
Three selectable modes
Lock out function
Built-in battery power indicator
Can use alkaline batteries (single use) or NiMH batteries (rechargeable)
Operational Modes
High: 600 lumens; 8 hours run-time; 260 m beam range
Mid: 200 lumens; 15 hours run-time; 120 m beam range
Low: 10 lumens; 192 hours run-time; 30 m beam range
The above parameters are tested in lab conditions using 3 x AA alkaline batteries with energy saving mode (down to 1 lumen) and data may vary between torch, batteries, environment and individual usage habits.
Battery Charger Information:
If you are going to use AA NiMH rechargeable batteries then you will also need to purchase suitable batteries and a battery charger if you do not already have them, please see the related products.
Battery Information
AA alkaline primary batteries are NOT rechargeable, for suitable replacements please see the related products.
